top of page


A list of our range of Bitumen, Affiliated Road-Construction Equipment, Terminal Equipment, Bitumen Emulsions, Primes, Pre-coats and Associated Equipment.


A standard bitumen usually used as a paving bitumen essential for road construction and for the production of asphalt pavements with superior properties.

Steadfast Africa supplies all penetration grade bitumen grades including:

  • Bitumen Penetration Grade 10 / 20

  • Bitumen Penetration Grade 20 / 30

  • Bitumen Penetration Grade 35 / 50

  • Bitumen Penetration Grade 50 /70

  • Bitumen Penetration Grade  70 / 100

  • Bitumen Penetration Grade 150 / 200

Other grades are available on request.


Modified bitumen offers more resistance to temperature variations, can withstand extreme climatic conditions & high traffic loads, offers excellent driving comfort and finally, leads to enhanced pavement life at reduced maintenance cost.


Steadfast offers a variety of modified Bitumen tailored to clients specifications. 



Bitumen is ‘cutback’ by adding controlled amounts of petroleum distillates such as kerosene. This is done to reduce the viscosity of the bitumen temporarily so it can penetrate pavements more effectively or to allow spraying at temperatures that are too cold for successful sprayed sealing with neat bitumen. The materials used to cutback bitumen will evaporate after application to leave the remaining material similar in hardness to the original bitumen.


A dispersion of bitumen particles on water, stabilized with the addiction of surfactants – Surface active agents – or most commonly known as emulsifiers, that will permit the bitumen to de diluted in water. They are primarily used for tack coats for use in between hot mix asphalt layers and prime coats for thin hot mix surfacing layers or chip seal pavements.


Steadfast supplies these in the following categories:


  • Anionic emulsion

  • Cationic emulsion

  • Eco-friendly primes

  • Spray and mix grades 


Almost all aggregates contain some dust, often as a result of loading, transporting and being stockpiled, and some moisture. It is therefore strongly recommended that all aggregates be precoated to minimize risks associated with poor adhesion and stripping in sprayed seals.

Steadfast supplies:

  • Plant Precoating

  • Field Precoating


Steadfast also has affiliations with engineering companies specializing in the production and manufacture of bitumen handling equipment.

  • Custom built bitumen handling and storage systems.

  • Bitumen drum decanting units or melters.

  • Bonded containerized bitumen storage tanks.

  • Cylindrical storage tanks (horizontal and vertical).

  • Bitumen drumming plants.

  • Bitumen pumping units.

  • Bitumen valves, fuel pumps, fuel metering and Bitubags.


Steadfast’s Product range is offered either:


  • Hot in Bulk Ex Refinery

  • Bulk ex-plant

  • Delivered in bulk onsite

  • Drums ex Durban & JHB

  • Drums packed into Containers

  • Drums delivered onsite (Flatbeds)

  • Shipped in to various ports

  • Bitutainers

  • In Drums or bags ex the Arabian Gulf and other alternatives​

bottom of page